Voip Tutorials
What is VOIP?
Voice Over Internet Protocol(VOIP) is a general term for a family of transmission technologies for delivery of voice communications over IP networks such as the Internet or other packet-switched networks. There are 3 different ways to make calls by using IP networks.
1)Phone to Phone:
There are two ways to make a phone to phone connection. You can use your regular phone plugged into an ATA adaptor, which in turn plugs into your broadband modem. Or you may also use an IP phone that plugs directly into your broadband connection.
2) Computer to Phone:
If you want to make a computer to phone connection, you need VOIP software, headset, earphones and microphone, but the party on the other end can use any phone which is not connected directly to the Internet. This type of call is not usually free, but the cost is quite a bit lower than what your telephone company charges. In the computer to phone connection, just the party who uses computer needs a particular VoIP software package.
3)Computer to Computer:
Computer-to-computer voice connection is the simplest form of VOIP.You need a computer with sound card, a headset consisting of earphones and microphone, and some VOIP software. There is no fee for this type of connection and you can make calls to anywhere in the world.
The simplest form of VOIP is a computer-to-computer voice connection. All that is required is a computer with sound card, a headset consisting of earphones and microphone, and some VOIP software. Most software packages are free and allow you to connect to any computer running the same software. There is no charge for this type of connection and calls can be made to anywhere in the world.
Video Tutorials:
1)This tutorial will show you how to install a Linksys SPA-962 IP phone. This tutorial is brought to you by thinkbright business voip.
How to Install a Linksys SPA-962
2)This tutorial will show you how to install a Cisco 7960 IP phone.
3)This tutorial will show you how to Factory Default the settings of a Cisco 7960 IP Phone. The tutorial is only applicable if the phone is already installed with the SIP firmware. This tutorial is brought to you by thinkbright business voip
How to Factory Default the Settings of a Cisco 7960 IP Phone
4)This tutorial will show you how to remotely configure a Cisco 7960 IP phone using TFTP settings.
How to Remotely Configure a Cisco 7960 with TFTP
5)This tutorial will show you how to install a Grandstream GXP-2000 IP Phone.
How to install a Grandstream GXP-2000
6)This tutorial will show you how to remotely configure a Polycom 320 or 330 IP phone using TFTP settings.
How to remotely configure a Polycom 320 or 330 with TFTP
7)This tutorial will show you how to remotely configure a Polycom 550 or 650 IP phone using TFTP settings.
How to remotely configure a Polycom 650 with TFTP
8)This tutorial will show you how to install a Linksys SPA-941 IP phone.
How to install a Linksys SPA-941
9)This tutorial will show you how to install a counterpath X-Lite VOIP softphone.
How to configure a X-Lite softphone
10)This tutorial will show you how to do an attended and blind transfer on the Polycom 320 or 330 IP Phone.
Transfering Calls on a Polycom 320/330
11)This tutorial will show you how to install a Grandstream handytone analog adapter which can then be used with a standard corded or cordless phone as well as fax machine.
Installing a Grandstream Handytone 286 Analog Adapter
12)This tutorial will give you an overview of the Polycom 320/330 phone as well as its basic features.
Introducing the Polycom 320/330 IP Phone
13)This tutorial will show you how to install an Attendant Console with the Polycom 650 IP Phone. The attendant console will allow you to add more
speed dial buttons or BLF buttons which will then allow your receptionist
to see who is on or off the phone.
Installing the Attendant Console with a Polycom 650 phone
14)This tutorial will show you how to install a Linksys PAP2T analog adapter
which can then be used with a standard corded or cordless phone as well as
fax machine.
Installing a Linksys PAP2T Adapter
15)This tutorial will show you how to install a Polycom 650 IP Phone.
Installing a Polycom 650 IP Phone
16)This tutorial will show you how to configure a Cisco 7960 which is
currently loaded with the Skinny software (SCCP). This same tutorial can
be used on upgrading the SKINNY software to SIP assuming you have the SIP software on your TFTP server.
